|
EG&G/PAR 5210 Dual Phase Lock-In Amplifier
The EG&G Model 5210 Lock-in Amplifier with a frequency range of .5 Hz to 120 kHz is the benchmark dual-phase …
|
Reconstrudio
Solicitar información
|
|
Lock in amplifier
|
Reconstrudio
Solicitar información
|
|
EG&G The 5204 Lock-In Analyzer allows both the in-phase and quadrature components of an applied signal to be quickly and easily measured. Frequency range is …
|
Reconstrudio
Solicitar información
|
|
The 110 Tuned Amplifier/Oscillator has a frequency range of 1Hz to 110kHz. The unit provides four outputs simultaneously: a second order (resonance) bandpass, a second …
|
Reconstrudio
Solicitar información
|
|
The 5301 Two-Phase Lock-in Amplifier combines proven analog techniques of signal recovery with digital microprocessor control. Includes a 5316 Differential Preamplifier. It features two-phase operation, …
|
Reconstrudio
Solicitar información
|
|
|
The 189 Selective Amplifier is a versatile low-noise, low-distortion selective amplifier / oscillator that simultaneously provides you with tunable bandpass, notch, low-pass and high-pass amplification …
|
Reconstrudio
Solicitar información
|
|
The 117 is a Low-Noise Preamplifier plug-in for use in the 124 & 126 Lock-In Amplifier and the 114 Signal COnditioning AMplifier. The unit is …
|
Reconstrudio
Solicitar información
|
|
|
The 118 Preamplifier Plug-In is used in the 124 & 126 Lock-In Amplifier and the 114 Signal Conditioning Amplifier. The unit is self-contained and derives …
|
Reconstrudio
Solicitar información
|
|
The 127 Two Phase Lock-in Amplifier Accessory, when used with any current P.A.R. Lock-in Amplifier, provides synchronous detection, integration and simultaneous readout of the in-phase …
|
Reconstrudio
Solicitar información
|
|
Dual Channel Lock-In Amplifier
Features:
Frequency range: 5 Hz - 200 kHz
Fully programmable via IEEE 488 …
|
Reconstrudio
Solicitar información
|
|
EG&G/PAR 273 Power Booster
The Model 273A Power Booster at 20 volts is compliant for special electrochemical applications such as battery research and etching. The overall …
|
Reconstrudio
Solicitar información
|
|
|
The 113 Low Noise Preamplifier is a general purpose instrument providing high gain and low noise amplification of signals from dc to 300kHz.
Attenuation Slope: 6 …
|
Reconstrudio
Solicitar información
|
|
The 5101 Lock-in Amplifier covers the frequency range 5Hz to 100kHz, has automatic reference tracking, built-in 2f mode and a 1 ?V full-scale sensitivity.
Metered
Recorder Output …
|
Reconstrudio
Solicitar información
|
|
The 114 Signal Conditioning Amplifier is a general purpose, low noise amplifier. The frequency range is 0.2Hz to 1MHz with a gain as much as …
|
Reconstrudio
Solicitar información
|
|
|
The 122 Lock-in Amplifier is continuously tunable from 5Hz to 50kHz in 4 ranges and has a calibration accuracy of ?5%.
|
Reconstrudio
Solicitar información
|
|
|
The 126 Lock-In Amplifier is a high-performance amplifier or phase sensitive detector, incorporating synchronous detection to recover a coherent signal buried in high ambient noise …
|
Reconstrudio
Solicitar información
|
|
|
The 5381 Current Sensitive Amplifier is a high gain current to voltage converter which simplifies the measurement of low level ac currents, such as those …
|
Reconstrudio
Solicitar información
|
